20 foot sailboat mast

10 Best Small Sailboats (Under 20 Feet)

Compact, easy to trailer, simple to rig, easy to maintain and manage, and affordable, the best small boats all have one thing in common: they offer loads of fun while out there on the water.

So whether you're on a budget or just looking for something that can offer ultimate daytime rides without compromising on safety, aesthetic sensibilities, alternate propulsion, and speed, the best small sailboats under 20 feet should be the only way to go.

Let's be brutally honest here; not everyone needs a 30-foot sailboat to go sailing. They come with lots of features such as electronics, entertainment, refrigeration, bunks, a galley, and even a head. But do you really need all these features to go sailing? We don't think so.

All you need to go sailing is a hull, a mast, rudder, and, of course, a sail. And whether you refer to them as daysailers, trailerable sailboats , a weekender sailboat, or pocket cruisers, there's no better way to enjoy the thrills of coastal sailing than on small sailboats.

There are a wide range of small boats measuring less than 20 feet available in the market. These are hot products in the market given that they offer immense thrills out on the sea without the commitment required to cruise on a 30-footer. A small sailboat will not only give you the feel of every breeze but will also give you the chance to instantly sense every change in trim.

In this article, we'll highlight 10 best small sailboats under 20 feet . Most models in this list are time-tested, easy to rig, simple to sail, extremely fun, and perfect either for solo sailing or for sailing with friends and family. So if you've been looking for a list of some of the best small sailboats , you've come to the right place.

So without further ado, let's roll on.

Table of contents

{{boat-info="/boats/hunter-15"}}

The Marlow-Hunter 15 is not only easy to own since it's one of the most affordable small sailboats but also lots of fun to sail. This is a safe and versatile sailboat for everyone. Whether you're sailing with your family or as a greenhorn, you'll love the Hunter 15 thanks to its raised boom, high freeboard, and sturdy FRP construction.

With high sides, a comfortable wide beam, a contoured self-bailing cockpit, and fiberglass construction, the Hunter 15 is certainly designed with the novice sailor in mind. This is why you can do a lot with this boat without falling out, breaking it, or capsizing. Its contoured self-baiting cockpit will enable you to find a fast exit while its wide beam will keep it steady and stable no matter what jibes or weight shifts happen along the way.

This is a small sailboat that can hold up to four people. It's designed to give you a confident feeling and peace of mind even when sailing with kids. It's easy to trailer, easy to rig, and easy to launch. With a price tag of about $10k, the Hunter 15 is a fun, affordable, and versatile boat that is perfect for both seasoned sailors and novices. It's a low-maintenance sailboat that can be great for teaching kids a thing or two about sailing.

Catalina 16.5

{{boat-info="/boats/catalina-16-5"}}

Catalina Yachts are synonymous with bigger boats but they have some great and smaller boats too such as Catalina 16.5. This is one of the best small sailboats that are ideal for family outings given that it has a big and roomy cockpit, as well as a large storage locker. Designed with a hand-laminated fiberglass sloop, the Catalina 16.5 is versatile and is available in two designs: the centerboard model and the keel model.

The centerboard model is designed with a powerful sailplane that remains balanced as a result of the fiberglass centerboard, the stable hull form, and the rudder. It also comes with a tiller extension, adjustable hiking straps, and adjustable overhaul. It's important to note that these are standard equipment in the two models.

As far as the keel model is concerned, this is designed with a high aspect keel as the cast lead and is attached with stainless steel keel bolts, which makes this model perfect for mooring or docking whenever it's not in use. In essence, the centerboard model is perfect if you'll store it in a trailer while the keel model can remain at the dock.

All in all, the Catalina 16.5 is one of the best small sailboats that you can get your hands on for as low as $10,000. This is certainly a great example of exactly what a daysailer should be.

{{boat-info="/boats/hobie-16"}}

There's no list of small, trailerable, and fun sailboats that can be complete without the inclusion of the classic Hobie 16. This is a durable design that has been around and diligently graced various waters across the globe since its debut way back in 1969 in Southern California. In addition to being durable, the Hobie 16 is trailerable, great for speed, weighs only 320 pounds, great for four people, and more importantly, offers absolute fun.

With a remarkable figure of over 100,000 launched since its debut, it's easy to see that the Hobie 16 is highly popular. Part of this popularity comes from its asymmetric fiberglass-and-foam sandwiched hulls that include kick-up rudders. This is a great feature that allows it to sail up to the beach.

For about $12,000, the Hobie 16 will provide you with endless fun throughout the summer. It's equipped with a spinnaker, trailer, and douse kit. This is a high-speed sailboat that has a large trampoline to offer lots of space not just for your feet but also to hand off the double trapezes.

Montgomery 17

{{boat-info="/boats/montgomery-17"}}

Popularly known as the M-17, The Montgomery 17 was designed by Lyle C. Hess in conjunction with Jerry Montgomery in Ontario, California for Montgomery Boats. Designed either with keel or centerboard models, the M-17 is more stable than most boats of her size. This boat is small enough to be trailered but also capable of doing moderate offshore passages.

This small sailboat is designed with a masthead and toe rail that can fit most foresails. It also has enough space for two thanks to its cuddly cabin, which offers a sitting headroom, a portable toilet, a pair of bunks, a DC power, and optional shore, and a proper amount of storage. That's not all; you can easily raise the deck-stepped mast using a four-part tackle.

In terms of performance, the M-17 is one of the giant-killers out there. This is a small sailboat that will excel in the extremes and make its way past larger boats such as the Catalina 22. It glides along beautifully and is a dog in light air, though it won't sail against a 25-knot wind, which can be frustrating. Other than that, the Montgomery 17 is a great small sailboat that can be yours for about $14,000.

Norseboat 17.5

{{boat-info="/boats/norseboat-17-5"}}

As a versatile daysailer, Norseboat 17.5 follows a simple concept of seaworthiness and high-performance. This small sailboat perfectly combines both contemporary construction and traditional aesthetics. Imagine a sailboat that calls itself the "Swiss Army Knife of Boats!" Well, this is a boat that can sail and row equally well.

Whether you're stepping down from a larger cruiser or stepping up from a sea kayak, the unique Norseboat 17.5 is balanced, attractive, and salty. It has curvaceous wishbone gaff, it is saucy, and has a stubby bow-sprit that makes it attractive to the eyes. In addition to her beauty, the Norseboat 17.5 offers an energy-pinching challenge, is self-sufficient, and offers more than what you're used to.

This is a small, lightweight, low-maintenance sailboat that offers a ticket to both sailing and rowing adventures all at the same time. At about 400 pounds, it's very portable and highly convenient. Its mainsails may look small but you'll be surprised at how the boat is responsive to it. With a $12,500 price tag, this is a good small sailboat that offers you the versatility to either row or sail.

{{boat-info="/boats/sage-marine-sage-17"}}

If you've been looking for a pocket cruiser that inspires confidence, especially in shoal water, look no further than the Sage 17. Designed by Jerry Montgomery in 2009, the Sage 17 is stable and should heel to 10 degrees while stiffening up. And because you want to feel secure while sailing, stability is an integral feature of the Sage 17.

This is a sailboat that will remain solid and stable no matter which part of the boat you stand on. Its cabin roof and the balsa-cored carbon-fiber deck are so strong that the mast doesn't require any form of compression post. The self-draining cockpit is long enough and capable of sleeping at 6 feet 6 inches.

The Sage 17 may be expensive at $25k but is a true sea warrior that's worth look at. This is a boat that will not only serve you right but will also turn heads at the marina.    

{{boat-info="/boats/laserperformance-laser-sb3"}}

Having been chosen as the overall boat of the year for 2008 by the Sailing World Magazine, the Laser SB3 is one of the coolest boats you'll ever encounter. When sailing upwind, this boat will lock into the groove while its absolute simplicity is legendary. In terms of downwind sailing, having this boat will be a dream come true while it remains incredibly stable even at extraordinary speed.

Since its debut in 2004, the Laser SB3 has surged in terms of popularity thanks to the fact that it's designed to put all the controls at your fingertips. In addition to a lightweight mast, its T- bulb keel can be hauled and launched painlessly. For about $18,000, the Laser SB3 ushers you into the world of sports sailing and what it feels to own and use a sports boat.

{{boat-info="/boats/fareast-18"}}

As a manufacturer, Fareast is a Chinese boat manufacturer that has been around for less than two decades. But even with that, the Fareast 18 remains a very capable cruiser-racer that will take your sailing to the next level. In addition to its good looks, this boat comes with a retractable keel with ballast bulb, a powerful rig, and an enclosed cabin.

Its narrow design with a closed stern may be rare in sailboats of this size, but that's not a problem for the Fareast 18. This design not only emphasizes speed but also makes it a lot easier to maintain this boat. Perfect for about 6 people, this boat punches above its weight. It's, however, designed to be rigged and launched by one person.

This is a relatively affordable boat. It's agile, safe, well-thought-out, well built, and very sporty.

{{boat-info="/boats/chuck-paine-paine-14"}}

If you're in the market looking for a small sailboat that offers contemporary performance with classic beauty, the Paine 14 should be your ideal option. Named after its famous designer, Chuck Paine, this boat is intentionally designed after the classic Herreshoff 12.5 both in terms of dimensions and features.

This is a lightweight design that brings forth modern fin keel and spade rudder, which makes it agile, stable, and faster. The Paine 14 is built using cold-molded wood or west epoxy. It has varnished gunnels and transoms to give it an old-time charm. To make it somehow modern, this boat is designed with a carbon mast and a modern way to attach sails so that it's ready to sail in minutes.

You can rest easy knowing that the Paine 14 will not only serve you well but will turn heads while out there.

{{boat-info="/boats/wd-schock-lido-14"}}

Many sailors will attest that their first sailing outing was in a Lido 14. This is a classic sailboat that has been around for over four decades and still proves to be a perfect match to modern small boats, especially for those still learning the ropes of sailing.

With seating for six people, the Lido 14 can be perfect for solo sailing , single-handed sailing, or if you're planning for shorthanded sailing. While new Lido 14 boats are no longer available, go for a functional used Lido 14 and you'll never regret this decision. It will serve you well and your kids will probably fall in love with sailing if Lido 14 becomes their main vessel during weekends or long summer holidays.

Bottom Line

There you have it; these are some of the best small sailboats you can go for. While there are endless small sailboats in the market, the above-described sailboat will serve you right and make you enjoy the wind.

Choose the perfect sailboat, invest in it, and go out there and have some good fun!

Related Articles

Daniel Wade

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Best Sailboats

Most Recent

What Does "Sailing By The Lee" Mean?

October 3, 2023

The Best Sailing Schools And Programs: Reviews & Ratings

September 26, 2023

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Similar Posts

Best Small Sailboats With Standing Headroom

December 28, 2023

Best Bluewater Sailboats Under $50K

How To Choose The Right Sailing Instructor

August 16, 2023

Popular Posts

Best Liveaboard Catamaran Sailboats

Can a Novice Sail Around the World?

Elizabeth O'Malley

June 15, 2022

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat

How Tall Are Sailboat Masts? 9 Examples

The mast height of a sailboat varies with every model.

So what determines the height of a mast?

Here’s How Tall Sailboat Masts Are:

As a general rule of thumb, the height of a boat’s mast will be somewhere between 1.25 to 1.35 times the boat’s length, for an average of about 1.3 times the length overall (LOA) of the boat. An aspect of 2.5 or lower will be a low-aspect rig; above that is considered a high-aspect ratio.

Table of Contents

Understanding a Sailboat’s Mast and Rig

Sailboats are driven through the water by the power generated by their sails.

This is done using sail area. Sail area is calculated using the height of the mast and the length of the boom.

The battens, long strips of wood inserts in the sail, allow more sail area as they extend beyond a straight line from the head of the mast to the back of the boom, thus allowing more cloth to be carried.

Keep in mind that the mast height does not equal the luff length of the main; there is a distance between the deck and the top of the boom.

Most mains do not go all the way to the top of the boom mast.

Wind Gradient:

Designers are also aware of the wind gradient, meaning that as the wind blows over the water, the surface causes drag.

So the breeze is stronger the higher you get off of the surface.

Taller masts allow you to reach these stronger winds.

Mast Height:

While mast height is a prime determinant in the area, it is also possible to make a mast too tall so that the boat is always in danger of taking a knockdown.

Note there are some performance boats designed with masts that are too tall for the craft’s weight, assuming that the weight of the crew will balance out the sail area.

One thing to bear in mind here is a rig’s aspect ratio: this is determined by dividing the designed sail’s luff length by the length of the foot. An aspect of 2.5 or lower will be a low-aspect rig; above that is considered a high-aspect ratio.

Higher aspect boats perform better upwind; lower aspect ratios generally are more powerful in other wind conditions and are usually easier to control.

What’s the Average Height of Sailboat Masts?

Sailboats can range from 6 feet to a hundred or more feet in length if you throw out the multi-masted sailing ships of old.

The mast height for every single one is different.

The height of a mast is usually carefully calculated by figuring the amount of power needed to move a certain hull shape and weight through the water. In many cases, in the 1960s through the 1980s, some designers went by feel.

A few boatbuilders would use the same mast across several of their models to save money in some cases.

As a general rule of thumb, the height of a boat’s mast will be somewhere between 1.25 to 1.35 times the boat’s length, for an average of about 1.3 times the length overall (LOA) of the boat.

So, if you were going to average the mast heights of all 20-foot boats, you’d have about a 26-foot high mast and about 39 feet on 30-foot boats.

Boats built solely for cruising, particularly in offshore winds, will have shorter masts, and performance boats will have taller masts.

How do you Determine the Height of a Sailboat Mast?

Several factors determine a sailboat’s mast height.

A performance boat will have a higher aspect ratio for its sails and thus have a taller mast. Cruising boats will generally have smaller masts for the same length of the boat.

A wider and heavier boat than another boat will need more power to move it, so it will usually have a taller mast. If this heavy boat is a low-aspect-ratio rig designed for offshore work, it will probably have a comparably shorter mast for ease of handling in higher winds.

Conversely, a racing boat will be lighter but still have a taller mast to generate maximum power upwind.

Boats built for maximum performance will have very tall masts for their length and be very difficult to handle for an inexperienced crew – and sometimes for a trained, experienced crew as well, as the difficulties some of America’s Cup boats encounter demonstrate.

• The Melges 24 is a performance racer with a mast height of 31.4 feet for a head-to-head comparison. Her mainsail’s luff length is 28.92 feet, and the foot is 12.45 feet; she is a high-aspect-ratio boat.
• The Islander 24 has a mast height of 28.82, so it is 2 and 1/2 feet shorter than our Melges. The main’s luff length is 25.75 feet, and the foot is 11.52, for a low aspect ratio and much smaller main.
• The Islander 24 weighs 4,200 pounds, while the Melges 24 weighs less than 1,800 pounds.

How Tall is the Mast on a 40 ft Sailboat?

If a yawl or other rig with multiple masts, it will have shorter masts than a sloop.

If the boat is a fractional rig with a small foretriangle, like a modern high-aspect-ratio Hunter, the mast will be taller than another sloop of the same length:

• The old Tartan 40, an all-around great Sparkman & Stevens design from 1984, has a 51-foot mast. This is a classic racer/cruiser.
• The Nordic 40, designed around the same time, has a 52-foot mast.
• The Canadian-built C&C Crusader, designed in 1968, has a mast of 48 feet, but their later Mark 2 designs have masts of 53 to 55 feet in height.

These are all sloops. Ketch and yawl rigs will have masts shorter than this, as the smaller mizzens provide power (and helm balance).

So, this shows us that mast heights will fall into a range for any given length of the boat, again depending on other factors such as its function (primarily racing or cruising).

What is the Optimal Height of a Sailboat Mast?

As specified earlier, the designed height of a mast for any given sailboat generally falls between 1.25 and 1.35 times its length overall (as opposed to its waterline length).

The optimal height will be based on the designer’s calculations of the sail area and aspect ratio needed for the boat’s intended purpose. Beyond the simple racing/cruising divide, there are inshore and offshore cruisers and casual and serious racers.

Inshore cruising boats will generally be designed for maximum safety, and the mast height may be less than 1.25 times the length. Offshore cruisers may also be divided into casual and serious distance cruisers; a boat designed for better offshore cruising performance will have a taller mast.

It is unusual to find many cruising boats with a higher ratio than 1.3, however.

Racing boats will usually have a 1.35 ratio, though it can be as high as 1.5 or even higher at the extremes of the sport.

The mast height for America’s Cup AC50, a 50-foot catamaran, is 77 feet.

How Tall is the Tallest Sailboat Mast?

Two boats are currently competing for the title of having the world’s tallest mast.

Mirabella 5, now named M5 and launched in 2003, is the largest single-masted yacht ever built at 294 feet long.

Her mast is over 290 feet high.

The boom is nearly 90 feet in length. The mainsail has an area of 16,000 square feet! Her reacher (a large, light-weight genoa with some characteristics of a spinnaker), at 20,600 square feet, is the world’s largest sail.

The White Pearl, the world’s largest sailing yacht at nearly 350 feet, was launched in 2014. She has three carbon-fiber wing-style masts that are a little more than 90 meters high.

This puts the masts for the two yachts within a few feet of each other, though White Pearl gets the nod.

References:

Masts – Wikipedia

Sloops – Sailboat Cruising

World’s Tallest Carbon Fiber Masts

Click to share...

• Mastering the Mast: A Comprehensive Dive into the World of Sailboat Masts and Their Importance

A mast is not just a tall structure on a sailboat; it's the backbone of the vessel, holding sails that catch the wind, driving the boat forward. Beyond function, it's a symbol of adventure, romance, and humanity's age-old relationship with the sea.

The Rich Tapestry of Sailboat Mast History

From the simple rafts of ancient civilizations to the majestic ships of the Renaissance and the agile sailboats of today, masts have undergone significant evolution.

• The Humble Beginnings : Early masts were basic structures, made from whatever wood was available. These rudimentary poles were designed to support basic sails that propelled the boat forward.
• The Age of Exploration : As ships grew in size and began journeying across oceans, the demands on masts increased. They needed to be taller, stronger, and able to support multiple sails.
• Modern Innovations : Today's masts are feats of engineering, designed for efficiency, speed, and durability.

A Deep Dive into Types of Boat Masts

There's no 'one size fits all' in the world of masts. Each type is designed with a specific purpose in mind.

• Keel Stepped Mast : This is the traditional choice, where the mast runs through the deck and extends into the keel. While providing excellent stability, its integration with the boat's structure makes replacements and repairs a task.
• Deck Stepped Mast : Gaining popularity in modern sailboats, these masts sit atop the deck. They might be perceived as less stable, but advancements in boat design have largely addressed these concerns.

Materials and Their Impact

The choice of material can profoundly affect the mast's weight, durability, and overall performance.

• Aluminum : Lightweight and resistant to rust, aluminum masts have become the industry standard for most recreational sailboats.
• Carbon Fiber : These masts are the sports cars of the sailing world. Lightweight and incredibly strong, they're often seen on racing boats and high-performance vessels.
• Wood : Wooden masts carry the romance of traditional sailing. They're heavier and require more maintenance but offer unparalleled aesthetics and a classic feel.

Anatomy of a Sail Mast

Understanding the various components can greatly improve your sailing experience.

• Masthead : Sitting atop the mast, it's a hub for various instruments like wind indicators and lights.
• Spreaders : These are essential for maintaining the mast's stability and optimizing the angle of the sails.
• Mast Steps and Their Critical Role : Climbing a mast, whether for repairs, adjustments, or simply the thrill, is made possible by these "rungs." Their design and placement are paramount for safety.

Deck vs. Yacht Masts

A common misconception is that all masts are the same. However, the requirements of a small deck boat versus a luxury yacht differ drastically.

• Yacht Masts : Designed for grandeur, these masts are equipped to handle multiple heavy sails, sophisticated rigging systems, and the weight and balance demands of a large vessel.
• Sailboat Masts : Engineered for agility, they prioritize speed, wind optimization, and quick adjustments.

Maintenance, Repairs, and the Importance of Both

Seawater, winds, and regular wear and tear can take their toll on your mast.

• Routine Maintenance : Regular checks for signs of corrosion, wear, or structural issues can prolong your mast's life. Using protective coatings and ensuring moving parts are well-lubricated is crucial.
• Common Repairs : Over time, parts like spreaders, stays, or even the mast steps might need repair or replacement. Regular inspections can spot potential problems before they escalate.

Read our top notch articles on topics such as sailing, sailing tips and destinations in our Magazine .

Check out our latest sailing content:

Costing: The Investment Behind the Mast

While the thrill of sailing might be priceless, maintaining the mast comes with its costs.

• Regular Upkeep : This is an ongoing expense, but think of it as insurance against larger, more costly repairs down the line.
• Repairs : Depending on severity and frequency, repair costs can stack up. It's always advisable to address issues promptly to avoid more significant expenses later.
• Complete Replacement : Whether due to extensive damage or just seeking an upgrade, replacing the mast is a significant investment. Consider factors like material, type, and labor when budgeting.

Upgrading Your Mast: Why and How

There comes a time when every sailor contemplates upgrading their mast. It might be for performance, compatibility with new sail types, or the allure of modern materials and technology.

• Performance Boosts : New masts can offer better aerodynamics, weight distribution, and responsiveness.
• Material Upgrades : Shifting from an old wooden mast to a modern aluminum or carbon fiber one can drastically change your sailing experience.
• Compatibility : Modern sails, especially those designed for racing or specific weather conditions, might necessitate a mast upgrade.

The Impact of Weather on Masts

Weather conditions significantly influence the longevity and performance of your mast. From strong winds to salty sea sprays, each element poses unique challenges. Regularly washing the mast, especially after sailing in saltwater, can help prevent the onset of corrosion and wear.

Customization and Personal Touches

Every sailor has a unique touch, and this extends to the mast. Whether it's intricate carvings on wooden masts, personalized masthead designs, or innovative rigging solutions, customization allows sailors to make their vessel truly their own.

The Role of Sails in Mast Design

It's not just about the mast; the type and size of sails greatly influence mast design. From the full-bellied spinnakers to the slender jibs, each sail requires specific support, tension, and angle, dictating the rigging and structure of the mast.

Safety First: The Role of Masts in Overboard Incidents

A mast isn't just for sailing; it plays a crucial role in safety. In overboard situations, the mast, especially when fitted with steps, can be a lifeline, allowing sailors to climb back onto their boat. Its visibility also aids in search and rescue operations.

The Rise of Eco-Friendly Masts

As the world grows more eco-conscious, the sailing community isn't far behind. New materials, designed to be environmentally friendly, are making their way into mast production. They aim to provide the strength and durability of traditional materials while reducing the environmental footprint.

The Intricate World of Rigging

The mast serves as the anchor for a complex system of ropes, pulleys, and cables – the rigging. This network, when fine-tuned, allows sailors to adjust sails for optimal wind capture, maneuverability, and speed. Mastery over rigging can elevate a sailor's experience and prowess significantly.

Historical Significance: Masts in Naval Warfare

In historical naval battles, the mast played a pivotal role. Damaging or destroying an enemy's mast was a strategic move, crippling their mobility and rendering them vulnerable. The evolution of masts in naval ships offers a fascinating glimpse into maritime warfare tactics of yesteryears.

The Science Behind Mast Vibrations

Ever noticed your mast humming or vibrating in strong winds? This phenomenon, known as aeolian vibration, arises from the interaction between wind and the mast's 

structure. While it can be a mesmerizing sound, unchecked vibrations over time can lead to wear and potential damage.

Future Trends: What Lies Ahead for Sailboat Masts

With technological advancements, the future of masts is bright. Concepts like retractable masts, integrated solar panels, and smart sensors for real-time health monitoring of the mast are on the horizon. These innovations promise to redefine sailing in the years to come.

Paying Homage: Celebrating the Mast

Across cultures and ages, masts have been celebrated, revered, and even worshipped. From the Polynesians who viewed them as spiritual totems, to modern sailors tattooing mast symbols as badges of honor, the mast, in its silent grandeur, continues to inspire awe and respect.

Conclusion: The Mast’s Place in Sailing

In the grand scheme of sailing, the mast holds a place of reverence. It's not just a structural necessity; it's a testament to human ingenuity, our quest for exploration, and the sheer love of the sea.

How often should I inspect my mast?

At least twice a year, preferably before and after sailing season.

Can I handle repairs myself?

Minor repairs, yes. But for major issues, it's best to consult a professional.

Is there an average lifespan for a mast?

With proper care, masts can last decades. Material and maintenance quality play a huge role.

How do I know if it's time to replace my mast?

Constant repairs, visible wear, and decreased performance are indicators.

What's the most durable mast material?

Carbon fiber is incredibly strong and durable, but aluminum also offers excellent longevity.

So what are you waiting for? Take a look at our range of charter boats and head to some of our favourite  sailing destinations.

Mast Queries Answered

I am ready to help you with booking a boat for your dream vacation. contact me..

Denisa Kliner Nguyenová

Mast Stepped: A Comprehensive Guide to Properly Installing and Maintaining Your Sailboat’s Mast

by Emma Sullivan | Jul 17, 2023 | Sailboat Gear and Equipment

Short answer mast stepped: Mast stepped refers to the position where a sailing boat’s mast is supported and secured on deck. It commonly involves attaching the base of the mast to a step or partners, ensuring proper rigidity and stability for sailing operations.

What does it mean for a mast to be stepped on a sailboat?

Blog Title: Navigating the Seas: Demystifying Mast Stepping on a Sailboat

Introduction: Sailing is often associated with a sense of freedom and adventure, as you glide through the serene waters powered only by the wind. However, behind every majestic sailboat lies a complex set of components working in synchrony. One such crucial element is the mast, which plays an integral role in allowing your vessel to conquer the seas. In this blog post, we will delve into what it truly means for a mast to be stepped on a sailboat and explore its significance in sailing.

What is Mast Stepping? When we refer to “stepping” the mast on a sailboat, we are essentially describing the process of erecting or installing it onto the boat’s deck. Picture this: just like erecting a tent requires setting up poles, attaching beams, and securing them firmly in place – stepping the mast follows similar principles but with much more complexity.

The Role of Mast: To comprehend why this process holds vital importance for sailors, understanding the role of a mast itself is paramount. The mast serves as an essential vertical spar that supports and secures all standing rigging – encompassing shrouds and stays – which ensures that your sails remain taut amidst ever-changing weather conditions. Additionally, it houses various components necessary for smooth navigation, including halyards (ropes used to raise and lower sails), sheaves (pulleys facilitating rope movement), and even instrumentation like wind sensors or radar systems.

Now that we have established why masts are pivotal in sailing, let’s explore the different types of masts commonly found on sailboats:

1. Keel-Stepped Mast: In modern sailboats, keel-stepped masts are prevalent. These masts rest securely in support at their base within or directly on top of the keel (the large fin-like structure underwater). This design enhances structural integrity and stability while also allowing for easy maintenance.

2. Deck-Stepped Mast: Alternatively, some sailboats feature deck-stepped masts. These masts are secured on the boat’s deck itself, with a lower support or compression post transmitting the mast’s loads to the keel. Deck-stepped masts offer advantages like simplified installation and removal, making them particularly favorable for smaller boats or those frequently transported by trailer.

The Process of Stepping the Mast: Now that you grasp the significance of the mast and understand its types let’s explore how this intricate process is executed:

1. Preparation: Before embarking on mast stepping, it is crucial to ensure that all necessary rigging hardware, lines, hoisting equipment (such as a crane or gin pole), and safety gear are readily available. Thoroughly inspecting all components for wear and tear is equally important to avoid any mishaps during installation.

2. Alignment & Integrity Check: Next comes aligning the mast properly at its designated step point on the boat’s deck or within/upon the keel structure (depending on mast type). Checking for proper alignment prevents undue stress on both the boat and mast while ensuring efficient sailing performance.

3. Hoisting & Securing: With preparation complete and alignment precise, it’s time to gently hoist the mast using an appropriate force measurement technique to prevent overloading any connection points or causing damage. Adequately securing the mast at its step point is paramount – utilizing sturdy stainless steel bolts, shackles, or other suitable fixtures ensures a robust connection.

4. Rigging Installation: Once your mast stands tall and firm, it’s time to attach various standing rigging elements such as shrouds, stays, halyards – each with their specific task in supporting sail control systems aboard your vessel. This requires careful attention to detail – adjusting tensions correctly according to manufacturer guidelines guarantees optimal sail performance across different wind conditions.

Conclusion: Stepping the mast on a sailboat is a critical procedure that sets the foundation for successful and safe sailing adventures. A well-adjusted mast brings stability, facilitates efficient control, and allows your sails to harness the power of the wind, propelling you towards new horizons. So, next time you embark on an aquatic journey, appreciate the skill and craftsmanship behind this process – knowing that every smooth glide owes its gratitude to a perfectly stepped mast.

How is a mast stepped on a sailboat? A step-by-step guide.

Stepping the mast on a sailboat is a fundamental process that marks the beginning of every sailing adventure. It involves raising and securing the mast into its proper position, allowing for the attachment of sails and rigging, ultimately enabling the boat to harness the power of wind and embark on exciting voyages. In this step-by-step guide, we will explore the intricacies of stepping a mast, providing you with all the necessary knowledge to do so successfully.

Step 1: Preparation Before stepping your mast, it is important to ensure that all preceding preparations have been completed. This includes assembling all necessary tools and equipment such as shackles, halyards, or winches. Additionally, inspecting both your boat’s standing rigging and mast itself for any signs of damage or wear is crucial for safety and optimal performance during future sailing endeavors.

Step 2: Clearing obstructions In order to safely step your mast onto your sailboat’s deck, make sure that all potential obstructions are removed. Check for any lines or fittings that may hinder the smooth process of raising the mast. A clutter-free workspace will significantly reduce stress and allow for seamless progress throughout this procedure.

Step 3: Proper positioning You now need to position your sailboat in an ideal location from where you can safely step the mast. Find a spot protected from strong winds or currents that might make this task more challenging. Ideally, choose an area with ample space around you to maneuver freely without risking damage to your vessel or nearby objects.

Step 4: Assemble assistance team Without doubt, stepping a mast is rarely a one-person job. Recruiting assistance from fellow sailors or friends will not only make this process less physically demanding but also contribute to safer execution overall. Ensure everyone involved understands their assigned roles and responsibilities before proceeding further.

Step 5: Attach standing rigging Begin the process of stepping the mast by attaching and adjusting the standing rigging. This includes securing your forestay, backstay, shrouds, and any other supporting cables or wires. Follow manufacturer guidelines and best practices to ensure proper tension and alignment. It is vital to double-check all connections, as loose or improperly attached rigging can compromise the stability and performance of your sailboat.

Step 6: Hoisting the mast Here comes the exciting part – raising the mast! Depending on your boat’s design, this step might require a crane or a simple manual lifting mechanism. Communicate clearly with your team and follow a synchronized approach while hoisting the mast to avoid any accidents or setbacks.

Step 7: Aligning and securing Once your mast is in an upright position, carefully align it with its designated base partner (known as a step) on deck. Any misalignment at this stage can result in unwanted stress on fittings or potentially damage critical components of your sailboat’s rigging system. Use shims if necessary to level out any minor discrepancies.

Step 8: Stabilizing and tightening Now that your mast is properly aligned, securely fasten it using nuts, bolts, or pins provided by its design specifications. Pay close attention to recommended torque values to avoid under- or over-tightening. This step ensures that even under significant wind forces, your mast remains steadfastly anchored.

Step 9: Check for secure fit Before celebrating the successful completion of stepping your sailboat’s mast, conduct a final inspection to ensure everything is secure. Inspect all attachments points thoroughly, checking for signs of movement or looseness. Shake the mast gently from various angles to identify any wobbling that may indicate insufficient tightening.

By following these nine steps meticulously, you will have successfully stepped the mast on your sailboat like a pro! Properly stepping a mast ensures both safety and optimal performance, granting you the freedom to set sail and explore new horizons with confidence. Remember, if you ever feel unsure or uncomfortable during any stage of this process, consult your boat’s manufacturer or seek professional assistance for guidance. Happy sailing!

Mast Stepped: Frequently Asked Questions (FAQ)

At Mast Stepped, we understand that many boat owners have questions about the mast-stepping process. To help alleviate any concerns or confusion, we’ve compiled a list of frequently asked questions (FAQ) below. Read on to discover detailed professional answers to these queries.

1. What is mast stepping, and why is it important? Mast stepping refers to the process of raising a boat’s mast into its designated position. This task is crucial because it enables your boat to properly harness wind power for sailing or cruising. A well-aligned and secured mast ensures better performance and stability on the water.

2. When should I step my mast? Mast stepping is typically done during spring commissioning, when boats are taken out of winter storage and prepared for the upcoming season. However, it can also be necessary if you’re re-rigging your mast or performing maintenance on your rigging system.

3. Can I step my mast by myself? Stepping a mast requires careful planning, preparation, and coordination. While some experienced sailors may be able to do it alone, it’s generally recommended to have at least one other person assisting you. Moreover, enlisting professionals who specialize in mast stepping can provide extra peace of mind and ensure a smooth process.

4. How much does professional mast stepping cost? The cost of professional mast stepping services varies depending on factors such as the size and complexity of your boat’s rigging system, location, and additional services required. It’s best to request quotes from reputable marine service providers who can assess your specific needs accurately.

5. What steps are involved in the mast-stepping process? Mast stepping involves several key steps:

– Preparation: Ensure all rigging lines are securely attached with no tangles or snags. – Support: Use sturdy supports such as a crane or gin pole to temporarily hold your mast in place during the raising process. – Alignment: Carefully align the mast with the boat’s keel, making sure it is perpendicular to the waterline. – Attachment: Securely attach the mast to its base (deck or keel) using appropriate hardware and fasteners. – Rigging: Reconnect all necessary lines, cables, and electrical connections according to your boat’s specific rigging configuration.

6. Are there any safety precautions I should take during mast stepping? Safety is paramount when dealing with a tall structure like a mast. It’s essential to follow best practices such as wearing proper protective gear (e.g., harnesses), using secure lifting equipment, and conducting a thorough inspection of all rigging materials beforehand. Additionally, be cautious of overhead powerlines that may pose a hazard during the mast raising process.

7. How often should I inspect my mast and rigging system? Regular inspections are crucial for detecting any signs of wear, corrosion, or damage that could compromise your boat’s safety while at sea. Ideally, you should visually inspect your rigging system yearly and perform more detailed examinations every three to five years or as recommended by professionals.

8. Can Mast Stepped assist me in selecting the right rigging components? Absolutely! Our team of experts can provide guidance on selecting appropriate rigging components tailored to your boat’s specifications and sailing needs. From wire ropes to turnbuckles and fittings, we’ll help you choose durable and reliable equipment from trusted manufacturers.

9. What are some common indicators that my mast needs attention? Signs that your mast may require attention include loose shrouds or stays, clanging noises while under sail, excessive movement or swaying of the mast when underway, leaks around deck penetrations connected to your mast (e.g., halyard exits), visible cracks or deformation on any part of the structure. If you notice any of these issues, it’s best to have them inspected promptly by professionals.

10. Can Mast Stepped assist with unstepping a mast too? Absolutely! Just as we specialize in mast stepping, our services also encompass unstepping masts. Whether you’re preparing for winter storage or need to address rigging maintenance, we have the expertise and equipment to safely handle the de-rigging process.

In conclusion, at Mast Stepped, we understand that proper mast stepping is essential for optimal sailing performance and safety. By addressing frequently asked questions about this process, we aim to empower boat owners with knowledge and resources to ensure their rigs are ready for every adventure on the water. Whether you decide to tackle mast stepping yourself or seek professional assistance, don’t overlook this crucial aspect of boat maintenance – your sailing experience will thank you!

The importance of proper mast stepping for sailboat performance.

Title: Elevating Sailboat Performance: Unveiling the Crucial Role of Proper Mast Stepping

Introduction: Ah, the allure of sailing! The mere thought of gliding through azure waters on a sailboat evokes a sense of freedom and adventure. Yet, behind every successful seafaring expedition lies an often overlooked factor that can make or break a sailor’s experience – proper mast stepping. In this blog, we delve deeper into the importance of ensuring your sailboat’s mast is securely and skillfully stepped, unlocking the secrets behind achieving optimal performance on the high seas.

1. Stability in Every Gust: Imagine navigating a turbulent sea only to find yourself at the mercy of every gusty squall. The trunk-like stability of proper mast stepping is precisely what separates sublime sailing from unbridled chaos. By meticulously aligning and securing your boat’s mast, you establish a foundation that resists excessive movement when encountering powerful wind currents. This stability not only enhances safety but also allows you to maintain better control over your vessel, optimizing performance even in challenging conditions.

2. Maintaining Alignment: Taming Sail Power: A crucial aspect of proper mast stepping lies in maintaining perfect alignment between your sails and rigging components. Just as an orchestra conductor ensures each musician produces harmonious melodies, correctly aligning your mast orchestrates collaboration between sail power and hull dynamics – key factors influencing boat speed and responsiveness. Through careful adjustment and tuning during mast stepping, optimum alignment can be achieved, maximizing propulsion efficiency while minimizing unnecessary strain on vital components.

3. Mastering Balance for Speed: Speed aficionados know that reducing drag is paramount to capturing those elusive knots on open waters. Correctly stepped masts enable boats to strike an equilibrium where dynamic forces align symmetrically with hydrodynamic profiles beneath the waterline—less drag equals more speed! Aligning the center of effort (where sails produce force) with the centerboard or keel down below ensures enhanced balance and a streamlined course through the waves, transforming your boat into a true speed demon.

4. The Symphonic Rigging Ensemble: Proper mast stepping unifies all elements of your sailboat’s rigging system into a harmonious symphony. Whether sails, sheaves, halyards, or shrouds – each element has its part to play in creating the perfect melody that propels you forward. By ensuring precise mast alignment during stepping, you unleash the full potential of each component to work together seamlessly, unlocking enhanced efficiency and promoting optimal performance on every seafaring escapade.

5. Defying Cataclysm: Durability and Safety: A sailboat is only as strong as its weakest link, and improper mast stepping can undermine not just performance but also safety at sea. The consequences of neglecting this critical aspect can range from sagging masts to compromised connections that give way when challenged by harsh weather or sudden jolts. Skillful mast stepping eliminates vulnerability by guaranteeing robust connections, significantly reducing the risk of structural failure or catastrophic dismasting when navigating choppy waters.

Conclusion: From beginners embarking on their maiden voyage to seasoned sailors seeking to optimize their craft’s performance, proper mast stepping remains an indispensable factor deserving meticulous attention. When done skillfully, it unveils a world where stability meets agility, harmony merges with power, and durability fuses with safety—all seamlessly working together to elevate your sailboat’s performance above all expectations. So next time you set sail, don’t overlook the importance of proper mast stepping – let it be the wind in your sails!

Common challenges and troubleshooting when stepping a mast.

Stepping a mast can often be a daunting task, especially for novice sailors or boat owners who are new to the process. It is important to approach it with caution and follow proper techniques to ensure a successful outcome. In this blog post, we will discuss some of the common challenges that you may encounter when stepping a mast and provide effective troubleshooting tips to overcome them.

1. Aligning the Mast: One of the primary challenges is aligning the mast properly during installation. Improper alignment can lead to structural issues or difficulty in raising and lowering the sails smoothly. To tackle this challenge, utilize a mast-stepping partner if available or seek assistance from crew members. Communicate clearly and establish guidelines to ensure everyone understands their roles in aligning the mast correctly.

2. Clearing Obstacles: Another challenge involves clearing any potential obstacles such as rigging lines, electrical wires, or deformed deck hardware that might hinder the smooth stepping of the mast. Conduct a thorough inspection of your boat’s setup beforehand and anticipate these obstacles in advance. If possible, reroute or temporarily remove any obstructions before beginning the process.

3. Dealing with Underneath Services: Boats often have various services passing through their decks, including plumbing lines, wiring conduits, or even fuel lines. Ensuring that these services are adequately protected during mast stepping is crucial to prevent damage while also ensuring they don’t impede the process. Consider using protective covers such as pipe insulation or duct tape where necessary.

4. Adjusting Tension: Proper tension adjustment for shrouds and stays plays an essential role in maintaining structural integrity and sail performance after stepping the mast. However, achieving optimum tension can be challenging due to factors such as limited visibility or excessive friction on turnbuckles when adjusting rigging lines under pressure. Utilize proper tools like turnbuckle wrenches or lubricants specifically designed for marine applications to ease tension adjustments effectively.

5. Securing the Mast: Once the mast is stepped and correctly aligned, it is crucial to secure it firmly while also avoiding excessive compression or stress points. Common methods include tensioning support lines (also known as “baby stays”) or using strap systems directly connected to the mast base. Ensure that these securing measures are evenly distributed on both sides of the mast and properly tensioned to maintain its stability.

6. Rigging Tuning: After successfully stepping the mast, you may need to fine-tune your boat’s rigging for optimal sailing performance. This can involve adjusting shroud tensions, forestay length, or mast rake depending on wind conditions and desired sail shape. Consult your boat’s manual or seek advice from experienced sailors to ensure proper tuning techniques specific to your vessel.

Stepping a mast requires patience, attention to detail, and a methodical approach. By understanding and addressing potential challenges in advance, you will be well-prepared to troubleshoot any problems that arise during this critical process. Remember, seeking guidance from seasoned sailors or professional riggers can greatly assist you in overcoming these challenges effectively and maintaining a safe sailing experience.

Mastering the art of mast stepping: Tips and techniques for sailboat owners.

Mastering the Art of Mast Stepping: Tips and Techniques for Sailboat Owners

Are you a proud sailboat owner? If so, then you already know that becoming an expert at mast stepping is a critical skill to possess. The process of stepping the mast might seem daunting at first, but with the right knowledge and technique, it can be mastered in no time. In this blog post, we will delve into the intricacies of mastering this art form, offering you valuable tips and techniques that will make raising your sailboat’s mast a breeze.

1. Safety First – Before even attempting to step your boat’s mast, ensure that safety is at the forefront of your mind. Taking precautions such as wearing appropriate safety gear (including a sturdy helmet), having a spotter to assist you, and checking all equipment thoroughly will minimize potential risks.

2. Plan Ahead – Planning plays a pivotal role in any successful endeavor, and stepping your boat’s mast is no exception. Familiarize yourself with the manufacturer’s instructions specific to your sailboat model. Understanding the exact procedure beforehand will prevent unnecessary confusion or errors during the process.

3. Gather Your Tools – To execute this task seamlessly, prepare by gathering all necessary tools and equipment beforehand. Common tools required include a tape measure, wrenches or socket sets (size determined by fasteners), shackles or pins for connecting stays/drill booms/Bob Stay/etc., halyards (mainly used for aligning fixtures), lubricants for easier installation, grease or anti-seize compound for preventing corrosion in stainless steel fittings.

4. Proper Alignment – Aligning your sailboat’s mast correctly is crucial to avoid damage when stepping it. Start by positioning the keel amidships while ensuring that fore/aft alignment rails are straightened in line with deck plates and web frames below decks using various measurements provided within manufacturers’ guidelines.

5. Calling on Friends – Family or friends come in handy during mast stepping. Having an extra pair of hands to assist you significantly reduces stress and increases efficiency. Assigning roles helps delegation, such as someone holding the base of the mast while another person secures the stays or shrouds.

6. Slow and Steady – While eagerness may prompt a desire to rush through this process, taking it slow and steady is key. Moving too quickly can lead to mistakes, mishaps, or even accidents. Patience and attention to detail are your allies throughout mast stepping.

7. The Power of Technology – Modern technology offers various tools that simplify mast-stepping tasks. Using a block-and-tackle system or an electric winch will reduce physical strain when raising your boat’s mast, allowing for smoother operations.

8. Avoiding Snags – Ensure that all lines, halyards, and anything else that could snag on surrounding objects are cleared away before starting the mast-stepping process. This prevents unnecessary snags and potential damage to your sailboat or surrounding structures.

9. The Perfect Alignment – Achieving perfect alignment involves using halyards or temporary stays to adjust for lateral movement once the spar is raised partially but not fully secured yet – don’t be afraid to make minor tweaks until satisfied with the outcome.

10.Preventing Corrosion – Regularly inspecting fittings for corrosion is essential in maintaining your sailboat’s overall integrity. Consider using anti-seize compound or grease on stainless steel fasteners during reassembly to mitigate future corrosion risks.

Mastering the art of mast stepping requires patience, practice, and attention to detail – but with these tips and techniques under your belt, you’ll soon become a pro at this vital skill for every sailboat owner! Remember always to prioritize safety first and enjoy many successful ventures out on the open water!

Recent Posts

• Sailboat Gear and Equipment
• Sailboat Lifestyle
• Sailboat Maintenance
• Sailboat Racing
• Sailboat Tips and Tricks
• Sailboat Types
• Sailing Adventures
• Sailing Destinations
• Sailing Safety
• Sailing Techniques

• BOAT OF THE YEAR
• Newsletters
• Sailboat Reviews
• Boating Safety
• Sails and Rigging
• Maintenance
• Sailing Totem
• Sailor & Galley
• Living Aboard
• Destinations
• Gear & Electronics
• Charter Resources
• Ultimate Boating Giveaway

11 Best Pocket Cruiser Sailboats to Fit a Budget

• By Cruising World Staff
• Updated: May 24, 2024

Looking for a trailerable pocket cruiser that offers that liveaboard feeling? This list features 11 small sailboats with cabins that have the amenities often found on larger vessels. They may not be ocean crossing vessels, but they’re certainly capable of handling big bays and open waters.

What is a pocket cruiser? It’s a small trailerable sailboat, typically under 30 feet in length, that’s ideal for cruising big lakes, bays, coastal ocean waters, and occasionally bluewater cruising. Pocket cruisers are usually more affordable, compact, and offer a level of comfort that’s comparable to bigger liveaboards.

Small cruising sailboats are appealing for many reasons, but if you’re like most of us, you want to maintain a certain level of comfort while on the water. We took a poll and these are what we found to be the best cruising sailboats under 30 feet.

– DON’T LET CARBON MONOXIDE SNEAK UP ON YOU – Install detectors on your boat to sniff out any buildup of carbon monoxide gas. Avoid running engines or generators while anchored or stopped for extended periods. Safety Tip Provided by the U.S. Coast Guard

Open and airy below deck, the Andrews 28 doesn’t sacrifice comfort for speed. Designed by Alan Andrews, the Southern California naval architect renowned for his light, fast raceboats, this 28-footer will certainly appeal to the cruiser who also enjoys a little club racing. Sporting a total of 6 berths, a galley, head and nav area, you might forget you are on a boat small enough to be easily trailered. The retractable keel allows the Andrews 28 to be easily launched and hauled and ensures it’s as comfortable as a daysailer as it is a racer. Click here to read more about the Andrews28.

Beneteau First 20

Small sailboat with a cabin? Check! Fun to sail? Modern design? Capable of flying a spinnaker? Check! Check! Check! The Finot-Conq-designed Beneteau First 20, which replaced the popular Beneteau first 211 nearly a decade ago now, is a sporty-but-stable pocket cruiser suitable for newcomers to the sport who are eager to learn their chops before moving up to a bigger boat or for old salts looking to downsize to a trailerable design. The boat features twin rudders, a lifting keel, and a surprisingly roomy interior with bunks for four. Click here to read more about the Beneteau First 20 .

Conceived as a way to bridge the gap between a safe, comfortable, family cruiser and a competitive racer, Gary Mull’s Ranger 26 does exactly as it was designed to. Undeniably fast, (one won the 1970 IOR North American Half-Ton Cup) the boat sails as well as it looks. However speed isn’t the Ranger’s only strong-suit, with over 7 feet of cockpit there’s plenty of room for socializing after an evening of racing. The Ranger 26 sports a nice balance of freeboard and cabin height ensuring that a handsome profile wasn’t sacrificed for standing headroom. Click here to read more about the Ranger 26.

Catboats were once a common site in coastal waters, where they sailed the shallow bays as fishing or work boats. Their large single and often gaff-rigged sail provided plenty of power, and a centerboard made them well-suited for the thin waters they frequently encountered. In the late 1970s, Canadian builder Hinterhoeller introduced the Nonsuch 30, a fiberglass variation of the catboat design, with a modern Marconi sail flown on a stayless mast, and a keel instead of a centerboard. The boat’s wide beam made room below for a spacious interior, and the design caught on quickly with cruising sailors looking for a small bluewater sailboat. Click here to read more about the Nonsuch 30 .

– SHOW THEM HOW MUCH YOU CARE – Nothing says ‘I love you’ like making sure the kids’ life jackets are snugged up and properly buckled. Safety Tip Provided by the U.S. Coast Guard

Debuted in 1971 in California, the Newport 27 was an instant success on the local racing scene. For a modest 27-footer, the Newport 27 has an unusually spacious interrior with over 6 feet of standing headroom. With 4 berths, a table, nav station, head and galley the Newport 27 has all the amenities you might find in a much bigger boat, all in a compact package. While quick in light air, the drawback of the tiller steering becomes apparent with increasing breeze and weather helm often leading to shortening sail early. Click here to read more about the Newport 27.

First splashed in 1969, the Balboa 26 continues to enjoy a strong following among budget-minded cruisers. Built sturdy and heavy, all of the boat’s stress points are reinforced. The spacious cockpit comfortably seats 4 and is self bailing, ensuring that sailors stay dry. While only 26 feet, the Balboa still has room for a double berth, galley with stove and freshwater pump, and an optional marine head or V-berth. The Balboa has the ability to sleep five, though the most comfortable number is two or three. Under sail, the Balboa is fast and maneuverable, but may prove a handful in heavy breeze as weather helm increases. Click here to read more about the Balboa 26.

Cape Dory 28

While the sleek lines and the teak accents of the Cape Dory 28 may grab the eye, it is the performance of the boat that make it unique. The Cape Dory comes with all amenities that you might need available, including a V-berth, 2 settees, and a head. Safe, sound and comfortable as a cruiser it is still capable of speed. Quick in light wind and sturdy and capable in heavy air, it is off the wind where the Cape Dory 28 shines with a balanced helm and the ability to cut through chop and still tack perfectly. Click here to read more about the Cape Dory 28.

Islander Bahama 28

On top of being a real eye-catcher, the Islander Bahama 28, with its 5-foot-6-inch draft and 3,300 pounds of ballast, sails beautifully, tracks well, and responds quickly to the helm. Inspired by the International Offshore Rule, it is unusually wide, offering stability in breeze without sacrificing the sheer and lines that make it so attractive. Below deck, the Islander Bahama 28 comes standard with plenty of berths and storage space and a galley complete with stove, icebox and sink. Click here to read more about the Islander Bahama 28.

– CHECK THE WEATHER – The weather changes all the time. Always check the forecast and prepare for the worst case. Safety Tip Provided by the U.S. Coast Guard

Much like its older sibling, the S2 8.6 still holds its contemporary style, despite its 1983 introduction. Like all other S2 Yachts, the 8.6 is recognized for the quality craftsmanship that allows the boat to hold up today.The S2 8.6 is a very comfortable and easily managed coastal cruiser and club racer. It’s relatively stiff, its helm feels balanced, and it tracks well. On most points of sail, it compares favorably with other boats of similar size and type. Click here to read more about the S2 8.6.

Contessa 26

When the Contessa 26 was released in 1965, it immediately proved itself to be a strong, seaworthy vessel. The Contessa has continued to prove itself throughout its lifetime, being the boat of choice for two solo circumnavigations under the age of 21. While upwind performance leaves some wanting, the boat is sturdy and can carry full sail in up to 20 knots of breeze. Suited more for single-handing, the Contessa lacks standing headroom and the accommodations are sparse. Nonetheless, the Contessa 26 performs well as a daysailer with guests aboard. Click here to read more about the Contessa 26.

The Hunter 27 perfectly encompasses the pocket cruiser ideal. Even if you don’t want a big boat, you can still have big boat amenities. With the generously spacious layout, wheel steering and a walkthrough transom the Hunter feels much larger than 27 feet. Step below deck and any doubts you had that the Hunter was secretly a big boat will be gone. The amenities below are endless; a full galley including stove, microwave and cooler, head with full shower, several berths and not to mention a saloon with seating for 6. The Hunter 27 has reset the benchmark for 27-footers. Click here to read more about the Hunter 27.

• More: 21 - 30 ft , Boat Gallery , monohull , Sailboat Reviews , Sailboats , used boat guide
• More Sailboats

2025 Boat of the Year Nominees Announced

New on the Docks: Leopard 46

Sailboat Review: Dufour 41

Pre-Owned: 1988 Hylas 47

Fender Protection on a Budget

Gear Test: Cruising Solutions’ Wireless Headphones

La Paz, Mexico, Open for Charter with The Moorings

Sunsail Expands Charter/Flotilla Options in Croatia and Greece

• Digital Edition
• Customer Service
• Privacy Policy
• Terms of Use
• Email Newsletters
• Cruising World
• Sailing World
• Salt Water Sportsman
• Sport Fishing
• Wakeboarding

Open for Retail and OEM/Rigger Sales! Check out the updated Dwyer Mast catalog and order online today.

Aluminum Sailboat Mast & Boom Extrusion

• Event calendar
• Annapolis Sailboat Show
• Fort Lauderdale International Boat Show
• Miami International Boat Show
• Oceanis 30.1
• Oceanis 34.1
• Oceanis 37.1
• Oceanis 40.1
• Oceanis 46.1
• Oceanis 51.1
• Oceanis Yacht 54
• Oceanis Yacht 60
• FIGARO BENETEAU 3
• Heritage Sailing Yacht
• Flyer 7 SUNdeck
• Flyer 7 SPACEdeck
• Flyer 8 SUNdeck
• Flyer 8 SPACEdeck
• Flyer 9 SUNdeck
• Flyer 9 SPACEdeck
• Antares 7 Fishing
• Antares 8 Fishing
• ANTARES 11 FLY
• Gran Turismo 32
• Gran Turismo 36
• Gran Turismo 41
• Gran Turismo 45
• Swift Trawler 35
• Swift trawler 41 Sedan
• Swift trawler 41 Fly
• Swift Trawler 48
• Swift Trawler 54
• Grand Trawler 62
• Heritage Powerboats
• Future Owners
• A REMARKABLE ANNIVERSARY
• Our History
• Our Architects and Designers
• Our philosophy
• Our Innovations
• Your way to ownership
• Tests and Awards

• Description
• Key Features
• Specifications

One heck of a number that has continuously evolved these last twenty years and more, with a touch of insolence that has kept it young.  The First 20 has become more aggressive and stylish. Her look is more modern and in her class she offers the best balance between safety, performance and habitability. This classic small boat enjoys playing in the big league in all weather.

NAVAL DESIGNER  : Finot - Conq Architects

YouTube est désactivé. Autorisez le dépôt de cookies liés aux vidéos pour accéder au contenu.

Exterior design

The First 20 has a harmonious and high-performing Finot-Conq hull that proves a model of stability. Thanks to an unstayed mast she features a generous sail plan with a square-top mainsail, 2016 code zero and asymmetric spinnaker on option. Yachtsmen are keen on the twin rudder helm and the chain locker.

Interior design

Increasingly habitable and comfortable, the First 20’s interior has done away with bulkheads. By replacing the mast prop with a structure built into the deck, this coastal cruiser offers a feeling of interior space second to none. Inside she is bathed in light by the deck hatch, and generously spacious with four berths and many storage spaces. She suits a wide variety of programmes.

Always ready to sail

Fun and a high-performer, this 6.50 m cruiser embraces a racing yet reassuring style. This unanimously acclaimed sailing yacht is small in size but has terrific qualities and she is loved because she is affordable and very easy to use.

Multi-programme

Whether for day-sailing or short cruises, the First 20 can adapt to all programmes, and all stretches of water. With her lifting keel and outboard engine, she can be beached and transported on a trailer. 

Theunstayed rig clears the deck and there is no need for low shrouds. Optimized with a square-top mainsail, the reasoning behind the sail plan is a combination of simplicity and performance.  With a furling genoa and 2016 code zero, the First 20 is ready for some remarkable achievements ! 

Although the First 20 has a racing temperament, she makes no concessions when it comes to safety. Her 1.80 m lifting keel contributes to her stability and improves her performance close-hauled. 

CHARACTERISTICS

Length Overall

Beam overall

8' 2"

Light displacement

Max. engine power

CE Certification

• CE Certification C6/D6.
• Hatch opens locker in cockpit bottom.
• Outboard engine
• Sliding companionway hatch with PMMA porthole to make it brighter.

• Forward cabin: - Separating curtain between salon and cabin. - Double berth, removable "net" storage (option) - large locker for storage below berth. Two additional berths in the saloon.
• Sink, 35 L fresh water tank + hand pump (option).
• Folding saloon table can be sued in the cockpit (option).

Learn to sail with Beneteau

Beneteau America and the American Sailing Association (ASA) have partnered to design a singularly modern sail training vessel.

Customer Care

Buying a BENETEAU doesn’t have to be a daunting task. We have teams of experts to guide you through the entire process – everything from sea trials, financing, and customization to after-sale commissioning, service, and maintenance. We are proud to have one of the largest, most highly-regarded dealer networks in the world. We’re ready to provide you with the assistance and expertise needed to launch you and your BENETEAU on a lifetime of happy, rewarding, and memorable voyages.

Other models in the range

7.9 m / 25'11

2.75 m / 24'7

9.81 m / 32'2''

3.23 m / 10'7''

10.85 m / 35' 7"

3.64 m / 11' 11"

12.58 m / 12.58

3.89 m / 3,89

14.07 m / 46’2’’

4.2 m / 13’9’’

14.99 m / 49’2’’

4.41 m / 14’6’’

Select your area and your language

• Chinese, Simplified

High School and College Sailors - 15% Off Apparel & Accessories - LEARN MORE

• Call Us +1-503-285-5536
• Sign in & Register
• Recently Viewed
• One Design Parts
• ILCA / Laser Parts

Laser / ILCA Spars - Top Sections, Lower Sections, and Booms

Upgrade or replace the spars on your Laser / ILCA sailboat today with a complete selection of top sections, lower masts, and booms from West Coast Sailing. Offering class legal boom with Harken blocks, aluminum lower mast sections for the Standard / 7, Radial / 6, and 4.7 / 4, aluminum upper section, and the latest composite upper mast and composite Radial / 6 lower mast. 

Please note that most spar sections are considered freight or oversized. Where available, shipping costs will be provided in checkout. Please contact us if you are looking to place a multi spar order as it may be less expensive to consolidate a shipment.

• Qty in Cart

ILCA 6 / Laser Radial Composite Lower Mast Section

Laser / ILCA Composite Mast Top Section

ILCA Mast Top Section

ILCA 7 Lower Mast Section

ILCA 6 / Radial Lower Mast Section

ILCA 4 Lower Mast Section

• Total: items /
• Add all to cart

Adding your products to cart

Subscribe to our newsletter.

Sign up for our newsletter to receive exclusive discounts, new product announcements, and upcoming sales.

Slide title

Welcome to the Ultimate 20!

The Ultimate 20 Sailboat is the result of a team of sailors with impressive credentials. Jeff Canepa headed a colloboration that included Jim Antrim of Antrim Associates-Naval Architects, sail maker and Olympic medalist Jay Glaser, and 505 builder and foil specialist Larry Tuttle.

PERFORMANCE

Sailors are amazed at the Ultimate 20’s precision control. Underway, sheer acceleration and speed is the first sensation. The Ultimate 20 is a light air performer and planes with stability in a breeze.  The spacious cockpit is comfortable and thoughtfully laid out for racing and day sailing.

LET'S RACE!

The Ultimate 20 Class promotes regattas and publishes class information. The Class has hosted a North American Regatta every year since 1995. The boat is mobile at under 1600 pounds trailered. Owners frequently travel to distant regattas in addition to racing in local One-Design and PHRF fleets.

SPECS: Ultimate 20

LOA: 20 feet, 10 inches

LWL: 18 feet

Beam: 8 feet, 6 inches

Draft - keel down: 5 feet

Draft - keel up: 9 inches

Displacement: 1,260 pounds

Ballast: 450 pounds

Mainsail: 205 square feet

Jib: 100 square feet

Class Spinnaker: 452 square feet

Ultimate 20 Class Organization

The Class Association is divided into four Districts within the US. Locally, we organize into fleets, which consist of U20s that regularly race together.

President: Travis Gregory ( email )

Vice President: Gregg Henning ( email )

Secretary/Treasurer: Emily Jones ( email )

District Chairs:

Dean Nelson – East

Marty Smihula – Northwest

Mike Josselyn - Southwest

Mike Reyes – Central

Organization Membership

Membership in the Ultimate 20 Class Association is open to owners or co-owners of U20s, crew members, and anyone interested in supporting the class. Member / Owners receive a decal, which must be displayed on the transom of their boats when racing in sanctioned events.

Annual dues, payable on January 1 of each year, are $55 for Active Members and $55 for Associate members.

The Ultimate 20 Class Association receives no income from any source other than membership dues. Dues support the class association website, our North American Championship event, and our class membership in US SAILING. The class actively sources custom parts to keep the fleet running.

If you would like to join the class association, please download, complete, and submit the  Membership Application Form , and make payment via PayPal or send your check for Active or Associate member dues to:

Ultimate 20 Class Association

Secretary-Treasurer

115 Pelican Ct

Mooresville NC 28117

U20 Class Resources

Class Rules (PDF)

North Americans Submission Form (PDF)

Mailsail logo:  JPG file  |  EPS File

Royalty Tag for New Sails Order Form (PDF)

Rigging Specifications and Maintenance

Sailmaker Guide:   Doyle

Sailmaker Guide: Shapes of Speed Ullman 2022

Sailmaker Guide: Ull man Legacy

Let's Race!

High sierra and north american championship, huntington lake, ca,  july 20-24, carolina keel boat one design  (east coast championship), lake norman yacht club, nc, november 9-10, pacific coast championship, park city sailing association, jordanelle resevoir, ut, september 27-29, details and more races here.

2024 Lake Norman Yacht Club MidWinters

Lake norman dishes out planing conditions again  is  lake norman still a light air venue, r ichmond yach club midwinters and the big daddy 2024 conclude, the great pumpkin was held on october 28-29 at the richmond yacht club with six boats sailing in the windward leeward course on saturday, and the round the islands pursuit race on sunday., lake norman delivers for the 2023 north american championship, the 2023 north american championship is in the books with three great days of racing at lnyc..

Contact Ultimate 2o Class Organization

© 2023, U20 Class Association.

All Rights Reserved

Website + Hosting: Web Studio Seattle

~ Back to Spars Main Page ~