Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
- Sailboat Guide
Tartan 3700
Tartan 3700 is a 37 ′ 0 ″ / 11.3 m monohull sailboat designed by Tim Jackett and built by Tartan Yachts starting in 1999.
Rig and Sails
Auxilary power, accomodations, calculations.
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL
Sail Area / Displacement Ratio
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64) 2/3
- SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
- D : Displacement in pounds.
Ballast / Displacement Ratio
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
Displacement / Length Ratio
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
- D: Displacement of the boat in pounds.
- LWL: Waterline length in feet
Comfort Ratio
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )
- D: Displacement of the boat in pounds
- LOA: Length overall in feet
- Beam: Width of boat at the widest point in feet
Capsize Screening Formula
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
Alternative draft: Keel/CB verson - BU: 4.0’ BD: 8.0’. Shoal draft version (‘beaver tail’): 5.0’.
Embed this page on your own website by copying and pasting this code.
Discover Related Sailboats
The Perfect Looping Boat for Your Family
- About Sailboat Guide
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Ausail Marine Group
Established in 1982, Ausail offers a complete professional brokerage service
Tartan 3700
When tartan set out to create the latest in a long line of excellent 37-footers we thought past the “usual” approach to the performance/accommodation puzzle. the result is a fast and stable performance cruising yacht with an uncommonly welcoming and functional interior..
A key aspect of the Tartan 3700’s reassuring stability is the generous 12-foot 7-inch beam that is carried well aft, but with an innovative twist at the stern where topside flare adds plenty of deck and cockpit space, while keeping the transom waterline on the trim side.
The accommodation plan of the Tartan 3700 works equally well for feeding and watering a cruising crowd or for pampering a family or two cruising couples on an extended sailing vacation. The two staterooms are completely private, each with generous-size clothes drawers and hanging locker. And by cleverly angling the bulkheads of the dinette outward and angling the bulkheads of the nav station and galley inward the feel of the 3700’s interior suits the particular function of each space.
Walking down the dock, the 3700 ‘s rig stands out from the crowd. A carbon fiber engineering showpiece, the lofty tapered rig sports an integrally molded, strong and lightweight masthead and crane.
Her double spreader rig is stronger, stiffer and lighter than an aluminum mast. This results in an increased righting moment, greater sail carrying ability and vastly improved sailing performance. Picture having four 200 lb crew members on the weather rail in all conditions, but the good news is you get their benefit without having to feed them or house them aboard.
Stronger and stiffer means safer and faster. Because carbon can be tailored to meet the changing load requirements in a mast, extra material can be added where it is needed most resulting in a mast that can be engineered with higher safety margins. A stiff rig remains in tune through changing conditions and results in all of the energy of the sails being directly transformed into the energy that drives the boat.
Tartan developed its Pocket Boom on its award winning Tartan 3400. This unique feature provides the ability to fit an easy to manage, uncompromised performance mainsail. Unlike furling masts or booms, the Pocket Boom mainsail is cut with full roach, full battens and optimized draft. Sailmakers are able to design sails for performance rather than meeting the constraints of the mast or boom. The Pocket Boom is fit with an always-in place sail cover, unzip it and raise the sail from its contained “pocket”and you are ready to sail. When dropping the main, it falls into the boom and lazy jack enclosure, no muss, no fuss. Zip the sail cover back over the sail and the 3700’s CCR is shipshape. With Tartan’s Pocket Boom, performance cruising is not compromised by convenience, instead it is enhanced.
Upwind the 3700 is fit with a roller furling, self-tacking jib. The cut is a high aspect ratio upwind blade with a long luff and tight sheeting angles. We increased the SA/Disp ratio to maintain light air performance and the high stability of the 3700 CCR allows the boat to carry full sail when others are reefing. Tacking is as simple as putting the helm over, while the jib and mainsail tack themselves. Short tacking out of a harbor or anchorage is done with little effort.
When its time to ease the sheets, set the 3700’s CCR 150% furling masthead reacher. This sail can be used close reaching in lighter winds, broad reaching in heavier conditions and dead downwind, wing and wing with the mainsail. Tartan’s pursuit of the perfect performance cruiser will keep you sailing while others have no choice but to start their engine.
Tartan 3700 , dedicated to delivering Tartan comfort and packed with performance and handling features to please the most devout sailor.
- New Sailboats
- Sailboats 21-30ft
- Sailboats 31-35ft
- Sailboats 36-40ft
- Sailboats Over 40ft
- Sailboats Under 21feet
- used_sailboats
- Apps and Computer Programs
- Communications
- Fishfinders
- Handheld Electronics
- Plotters MFDS Rradar
- Wind, Speed & Depth Instruments
- Anchoring Mooring
- Running Rigging
- Sails Canvas
- Standing Rigging
- Diesel Engines
- Off Grid Energy
- Cleaning Waxing
- DIY Projects
- Repair, Tools & Materials
- Spare Parts
- Tools & Gadgets
- Cabin Comfort
- Ventilation
- Footwear Apparel
- Foul Weather Gear
- Mailport & PS Advisor
- Inside Practical Sailor Blog
- Activate My Web Access
- Reset Password
- Customer Service
- Free Newsletter
Blue Jacket 40 Used Boat Review
Catalina 270 vs. The Beneteau First 265 Used Boat Match-Up
Ericson 41 Used Boat Review
Mason 33 Used Boat Review
How to Create a Bullet-Proof VHF/SSB Backup
Tips From A First “Sail” on the ICW
Tillerpilot Tips and Safety Cautions
Best Crimpers and Strippers for Fixing Marine Electrical Connectors
Polyester vs. Nylon Rode
Getting the Most Out of Older Sails
How (Not) to Tie Your Boat to a Dock
Stopping Mainsheet Twist
Fuel Lift Pump: Easy DIY Diesel Fuel System Diagnostic and Repair
Ensuring Safe Shorepower
Sinking? Check Your Stuffing Box
What Do You Do With Old Fiberglass Boats?
Boat Repairs for the Technically Illiterate
Boat Maintenance for the Technically Illiterate
Whats the Best Way to Restore Clear Plastic Windows?
Stopping Holding-tank Odors
Giving Bugs the Big Goodbye
Galley Gadgets for the Cruising Sailor
The Rain Catcher’s Guide
Sailing Gear for Kids
What’s the Best Sunscreen?
UV Clothing: Is It Worth the Hype?
Preparing Yourself for Solo Sailing
R. Tucker Thompson Tall Ship Youth Voyage
On Watch: This 60-Year-Old Hinckley Pilot 35 is Also a Working…
On Watch: America’s Cup
On Watch: All Eyes on Europe Sail Racing
Dear Readers
- Sailboat Reviews
Tartan 3700 & 4100
Two of the best built production boats in america, the 3700 and 4100 will go darn near anywhere..
It only makes sense that a 41-foot boat will be significantly faster than a 37-foot sistership, right?
That a 41-footer will have significantly larger living spaces and greatly improved accommodations?
And, that the bigger boat will have more room on deck for entertaining purposes?
Or does it?
With the assistance of Tim Jackett, general manager and chief designer at Tartan Yachts, we compared his company’s most popular models, the 4100, which has been in production for four years, and the recently introduced 3700.
Our findings were intriguing: We discovered that a 10% increase in boat size doesn’t necessarily translate into a significant increase in speed or creature comforts.
The results, in some cases, even surprised Jackett.
The Company Tartan Marine grew out of Grand River, Ohio boatbuilder Douglass & McLeod, which in the early 1960s formed a partnership with Charles Britton to build the Tartan 27, designed by Sparkman & Stephens. During the 1980s the company bounced around among several owners (John Richards and Jim Briggs, Baltic Holding Corp., NavStar Marine, Polk Industries), but managed to survive. It currently prospers under ownership that recapitalized the organization as Fairport Yachts, Inc. The company acquired the C&C label in 1998, and added a “strictly performance” product to its portfolio. Both lines are produced at a factory in Fairport Harbor, Ohio.
Like Sabre and Pacific Seacraft, Tartan boats appeal to sailors seeking a combination of speed, comfort, styling and above average construction, and who are willing to pay more for it. Tartan boats are described as “moderate displacement performance cruisers.”
Since its reorganization the company has grown and now has 150 employees who build 90-100 boats a year. Following the introduction in 1999 of the C&C Express 101 (see October 1, 1999), the company’s production has been split fairly evenly between the two lines; in 2000, roughly 60% of the boats produced are the Tartan 3500, 3700, and 4100.
The company’s rebound was aided by establishment of a 21-dealer network that covers both coasts.
Design When describing Tartan boats, Jackett said that they “share similar design and performance targets, are like products, and are designed to be well-behaved.”
To meet his goal of building a “legitimate performance cruiser,” he said that design starts with upwind performance as a benchmark. “We want efficiency and comfortable motion, sail-carrying ability, underwater cleanness, and strength.”
When he began conceptualizing the 3700 he faced the challenge of matching the interior volume and speed of the 4100 in a boat 4 feet shorter.
“Two couples going cruising are going to bring the same amount of gear, regardless of the size of the boat,” he said.
To accomplish this, the bow entry angle of the 3700 is not as fine as the 4100, which allows for more space forward, and the entire hull is rounder, which produces more interior volume. A wider stern gives stability when sailing off the wind. Maximum beam is 12′ 8″ and beam at the stern is nearly 11′.
“A flat-bottomed boat, like the 4100, is stickier in the water in light air conditions,” Jackett said. Though the 3700 has more proportional wetted surface area, he predicts good light air performance.
The sail area/displacement, beam/displacement, and displacement/length ratios of the 4100 and 3700 are nearly identical (see table of specifications). The range of positive stability is given as 125°, better than the 120° minimum we think is prudent for bluewater sailing.
“We’re also trying to fit ‘people shapes’ on a shorter waterline,” he said, describing flat sections where floors meet the hull, for instance, and berths large enough to sleep adults comfortably.
Three keel options are available for both boats—deep fin, moderate draft beavertail and shoal draft centerboard. Ballast is lead. Rudders are efficient, high aspect ratio spades.
Construction The hand laid-up hulls are solid fiberglass below the waterline and cored with Baltek balsa above the waterline. Alternating layers of strand mat and unidirectional E glass make up the laminate and are vacuum-bagged. “Windows” where deck hardware and stanchions will be installed are solid fiberglass. Isophtalic polyester and vinylester resins are used to help prevent blistering.
The deck is balsa-cored.
Rather than using fiberglass pans and liners, bulkheads are constructed of pressure laminate and tabbed to the hull with mat and roving, as is the floor grid. We think this is a superior way to build boats; Tartan is one of the few production builders left to use built-up wood interiors. All semi-custom and custom builders like Hinckley, Morris and Alden do, too.
The hull-deck joint follows the company’s 20-plus-year practice of bedding the seam with 3M 5200 and fastening with stainless steel bolts through predrilled holes in an aluminum bar laid between the hull and deck.
The rudders are foam-cored fiberglass with 304 stainless steel rudderstocks. This common construction makes it difficult to keep water out, due to the different coefficients of expansion of fiberglass and steel. For new boat construction, we think there is a lot of merit in composite rudderstocks. In any case, 316 stainless would be preferable to 304. For a more detailed discussion of foam-core rudders, see the January 15, 2000 issue.
Deck Because the deck plans of the two boats are nearly identical, the primary differences are overall dimensions.
High quality hardware is supplied by Lewmar and Harken; the portlights are by Hood Yacht Systems.
Both boats have double-spreader rigs with slightly swept-back spreaders, which make for narrow sheeting angles to improve upwind performance. The backstay is split for easier access to the stern swim steps. The mast and boom are made by Offshore Spars.
Movement about the deck is unimpeded; the side decks are 24″ wide and clean. Chainplates are inboard near the cabin sides. The double lifelines, stanchions and pulpits are 27″ high. Handrails on each side of the cabin top are teak.
There’s adequate light on cloudy days, and ventilation during steamy summer months. Both boats have six stainless portlights on each side of the cabin, large hatches over living areas and the head, and Dorade vents forward of the mainsheet traveler.
Deck hardware is well organized for casual cruising or buoy racing. Sail controls are led aft. A typical equipment list includes Lewmar sheet lead blocks on Lewmar tracks running through Harken turning blocks to Spinlock XT sheet stoppers. The winches are by Harken and most are two-speed self-tailers.
Anchor stowage is in two compartments with adequate space for two anchors and rope or chain rode. The bow roller on the 3700 is a single stainless steel plate; the 4100 is equipped with a twin roller offset from the centerline.
The major difference between the decks of the two boats is in the cockpit, where the 4100 enjoys an advantage in centerline length—78″ compared to 56″ for the smaller boat.
Cockpit seating on the 3700 is on comfortable 52″ by 18″ seats, contoured to provide excellent lumbar support.
Both boats are equipped with destroyer-style wheels, Whitlock Steering Systems and Ritchie compasses. The 4100 is equipped with a handy teak table that stores flush against the pedestal. Engine controls are within easy reach of the helmsman.
Moving forward from the helm on the 3700 requires stepping over the aft corner of a seat, which is somewhat annoying.
Because of the aft cabin, the port seat lockers are only 12″ deep (but 52″ wide and 7′ long), and are used for installation of a heater, built-in battery charger, and manual bilge pump, which share space with dock gear. The emergency tiller also is stowed here.
Accommodations Both boats have nearly identical accommodations, though the layouts for galley, head and nav station are reversed.
“I hadn’t noticed or thought about it,” said Jackett. “I start with a clean sheet of paper for every design and try to execute a concept.”
The joinerwork reflects fine craftsmanship—cherry wood surfaces are smooth and nicely varnished, and fiberglass surfaces are smooth and shiny.
Though the 4100 is 4′ longer on deck, that doesn’t translate to a dramatic difference in dimensions belowdecks. The 4100’s saloon measures 9.75′ long and 7.5′ wide, compared to the 8.8′ by 6.7′ dimensions of the 3700.
Headroom in the main cabin of the 3700 is 6′ 4″ inches; in the 4100 headroom is 6′ 5″.
The settees in both boats are nearly identical in length—70″, though the seats in the 4100 are wider.
Similarly, the dining tables are near twins. With folding leaves in the upright position, each is about 44″ wide and 34″ long.
“The first ten 3700s had pipe berths amidships,” Jackett said, “but that’s not what the market wants.”
The navigation station on the 4100 is located to starboard facing outboard, and is to port facing forward on the 3700; the latter arrangement is our first choice. Both provide 25″-27″ x 35″-39″ work surfaces.
Another of Jackett’s rules: “Every inch of extra space I can find in staterooms and heads goes into the main cabin and galley.”
His newest designs have an island on the centerline at the foot of the companionway opposite the L-shaped galley. It provides a counter where the cook can work at a pivot point of the boat when heeled.
The island on the 4100 is 48″ x 42″, compared to the smaller 27″ x 15″ island on the 3700. Both are equipped with double stainless steel sinks. The galley can be entirely enclosed by lifting a tilt-up counter at the end of the island. Countertops are Formica, though a “solid surface” material similar to Corian™ is an option.
Both galleys are equipped with Force 10 3-burner stoves. Storage areas on shelves and in drawers is adequate for extended cruising.
Both boats have staterooms fore and aft that are furnished with queen-sized berths.
Interestingly, when we asked Jackett to compare the two, he made a discovery.
“The aft cabins in the 3700 and 4100 are identical. That was a surprise,” he said. Both are equipped with a solid door, teak and holly sole, vanity, cedar lined cabinets and opening ports.
Standing headroom in the aft cabins exceeds 6′.
Berths in the forward cabins are nearly identical. Both measure approximately 82″ on the centerline, and are 77″ wide. Headroom in the forward cabin of the 3700 is 6′ 2; in the 4100 it’s 6′ 3″.
The head receives special attention since Jackett feels that the minimum acceptable size for a shower is 26″ square. Meeting that objective required slightly offsetting the companionway on the 3700.
The head on the 3700 is 67″ long, compared to the head on the 4100, which measures 76″. Both are approximately 48″ wide and have 6′ 3″ headroom. They are well-ventilated by opening portlights and hatches. A neat wrinkle is a unique folding shower door that, when not in use, attaches out of the way to the hull. We’d guess that the showers will double as hanging lockers for wet foul weather gear.
Performance With assistance from Jim Long of H & S Yacht Sales of Alameda, California, who lives aboard a 4100, we tested her in varied conditions on San Francisco Bay. We were not able to sail the 3700.
The 4100 motored easily into a stiff breeze at 7.5 knots with the Yanmar 50 rumbling at 2500 RPM; boat speed increased to 8 knots at 3,000 RPM. A well-insulated engine compartment allowed us to converse belowdecks at normal voice levels.
Initially sailing on flat water in 10 knots of wind, she sailed to within 30°-35° of apparent wind and boat speed was 4.5-5 knots.
When wind speed increased to 15 knots, boat speed increased to 6 knots, and she developed a hint of weather helm. By our estimates, she tacked through 90°. When the bay grew lumpy, she felt buoyant but did not hobbyhorse.
Footing off to 65° in 18 knots of wind, speed jumped to 8-plus knots.
Admittedly overcanvassed, we carried a full main and 110% genoa in 22 knots of wind and saw boat speed increase to 9.5 knots on a close reach, even with the traveler down.
Sailing at 120° of apparent wind with the genoa slightly blanketed, boat speed held steady at 8.5 knots; she was flat, and the crew was comfortable.
Conclusion Considering the significant price differential between the two boats, potential buyers can evaluate the 3700 and 4100 using several criteria. Among them:
Performance. Since we were unable to test the 3700 we can only speculate that, based on Jackett’s design skills and statistical performance indicators, the boats will perform similarly.
The 4100’s 3′ longer waterline will be most noticeable on long downwind legs; the longer boat would travel the 2,000 miles from San Francisco to Honolulu at least one day faster than the 3700.
Intended use. Both boats are well constructed, so we’d sail either across the ocean. However, the 4100 would be our first choice; she’s heavier so will be more comfortable offshore, and has a longer waterline.
Creature comforts. The main cabins and staterooms are nearly identical. Both will sleep 4-6 comfortably. Galleys are large enough for extended cruising. Though smaller, the head on the 3700 is large enough for average-sized adults. The most significant difference between the two is in the additional cockpit space of the 4100.
In some respects, it doesn’t seem that 4 feet buys you all that much, but though perhaps subtle, differences do exist, and only you can say whether they are worth $65,000.
As far as comparison with other boats, a Dehler 36 sells for $141,000, a Moody 42 goes for about $260,000 and a Jeanneau Sun Odyssey 43DS for $203,000. We think that when you look deep into the Tartans, they compare very favorably.
Contact- Fairport Yachts, 1920 Fairport Nursery Rd., Fairport Harbor, OH 44077; 440/354-3111, www.tartanyachts.com.
RELATED ARTICLES MORE FROM AUTHOR
Leave a reply cancel reply.
Log in to leave a comment
Latest Videos
Cabo Rico 34 Boat Review
Super Shallow Draft Sailboat: The Leeboard Sharpie
Hans Christian 41T – Boat Review
Seven dead after superyacht sinks off Sicily. Was the crew at...
Latest sailboat review.
- Privacy Policy
- Do Not Sell My Personal Information
- Online Account Activation
- Privacy Manager
- Visit Our Blog about Russia to know more about Russian sights, history
- Check out our Russian cities and regions guides
- Follow us on Twitter and Facebook to better understand Russia
- Info about getting Russian visa , the main airports , how to rent an apartment
- Our Expert answers your questions about Russia, some tips about sending flowers
Russian regions
- Altay republic
- Irkutsk oblast
- Kemerovo oblast
- Novokuznetsk
- Khakassia republic
- Krasnoyarsk krai
- Novosibirsk oblast
- Omsk oblast
- Tomsk oblast
- Tuva republic
- Map of Russia
- All cities and regions
- Blog about Russia
- News from Russia
- How to get a visa
- Flights to Russia
- Russian hotels
- Renting apartments
- Russian currency
- FIFA World Cup 2018
- Submit an article
- Flowers to Russia
- Ask our Expert
Kemerovo Oblast, Russia
The capital city of Kemerovo oblast: Kemerovo .
Kemerovo Oblast - Overview
Kemerovo Oblast is a federal subject of Russia located in the south-east of Western Siberia, part of the Siberian Federal District. This region is also known as Kuzbass . In 2019, “Kuzbass” officially became the second name of Kemerovo Oblast. Kemerovo is the capital city of the region.
The population of Kemerovo Oblast is about 2,604,300 (2022), the area - 95,725 sq. km.
Kemerovo oblast flag
Kemerovo oblast coat of arms.
Kemerovo oblast map, Russia
Kemerovo oblast latest news and posts from our blog:.
11 February, 2019 / Kemerovo - the view from above .
21 April, 2016 / The carnival-parade at the festival GrelkaFest in Sheregesh .
2 June, 2013 / Summer snowfall in Kemerovo .
9 February, 2012 / "BelAZ 75600" - the biggest truck in the former USSR .
31 October, 2010 / The ship-house in Kemerovo oblast .
History of Kemerovo Oblast
People began to settle in what is now the Kemerovo region several thousand years ago. The indigenous peoples of the region were Shortsy and Teleuts. In 1618, Russians founded Kuznetsky stockaded town in the south of the present region to protect Russian lands from the raids of the Mongols and Jungars. In 1698, Mariinsk was founded.
In 1721, Mikhailo Volkov found “burning mountain” (a burning coal seam) on the banks of the Tom River and thus became the person who discovered the Kuzbass coal deposits. Industrial development of this land started at the end of the 18th century.
During the 19th century, the territory of the Kemerovo region was part of the Tomsk province. During this period, the first industrial enterprises appeared here: Tomsk ironworks, Gavrilovsky and Gurievsky silver plants, Suharinsky and Salairsky mines. Construction of the Trans-Siberian Railway was one of the main reasons for the rapid development of the local industry.
More historical facts…
In Soviet times, the region became part of the West Siberian krai, and then - Novosibirsk oblast. The development of the coal, metallurgical and chemical industries continued: Kemerovo Coke Plant, Kuznetsk Metallurgical Plant, a lot of new mines. The workers’ settlements built near the industrial enterprises quickly obtained the status of towns: Kiselyovsk, Osinniki, Krasnobrodsky, Tashtagol, Kaltan, Mezhdurechensk and others.
During the Second World War, this region was a major supplier of coal and metal. More than 50 thousand tanks and 45 thousand aircraft were produced using steel from Novokuznetsk. 71 industrial enterprises were evacuated to Kuzbass from the occupied regions, most of them remained in the region after the war.
In 1943, Kemerovo Oblast became a separate region that included 17.5% of the territory and 42% of the total population of Novosibirsk Oblast. After the war, the region continued to grow rapidly. On September 18, 1984, about 100 km from Kemerovo, a peaceful underground nuclear explosion was carried out, the power of the explosive device was 10 kilotons.
In the 1990s, the region’s economy declined. However, by the end of the 20th century, there were some positive developments - the development of the coal industry in the first place. Special attention was paid to the development of open-pit coal mining, as a more effective and safe way.
Beautiful nature of Kemerovo Oblast
Mountain stream in the Kemerovo region
Author: Sergey Timofeev
On the shore of a small lake in Kemerovo Oblast
Kemerovo Oblast landscape
Kemerovo Oblast - Features
Kemerovo Oblast is one of the few Russian regions that has a recognized and well-known alternative name “Kuzbass” - the abbreviation of “Kuznetsk coal basin” occupying a large part of the territory of the region.
It is the most densely populated part of Siberia. The length of the region from north to south is about 500 km, from west to east - 300 km. Russians make up more than 90% of the population. There are small nations of Shortsy, Teleuts, Siberian Tatars who have preserved their cultural traditions.
The climate is sharply continental with long cold winters and warm short summers. The average temperature in January is minus 17-20 degrees Celsius, in July - plus 17-18 degrees Celsius.
Today, about 86% of the population of Kemerovo Oblast lives in cities and towns making it one of the most urbanized regions of Russia. The largest cities are Kemerovo (548,000), Novokuznetsk (540,000), Prokopievsk (185,000), Mezhdurechensk (95,400), Leninsk-Kuznetsky (91,600), Kisilyovsk (83,700), Yurga (79,700), Belovo (70,100), Anzhero-Sudzhensk (65,700).
Sheregesh, a village located at the foot of Zelenaya Mountain in Tashtagol district, is one of Russia’s most popular ski resorts. The ski season lasts from November to May. Kuznetsky Alatau Reserve and Shorsky National Park are the main natural attractions.
Kemerovo Oblast plays a significant role in Russian industry. The following mineral resources are mined here: coal, gold, silver, iron ore, manganese ore, aluminum, nepheline ore, lead, zinc, barite, quartz, limestone, clay, dolomite, sand.
Kuznetsk coal basin is one of the largest coal basins in the world. The most important centers of the local coal industry are Prokopyevsk, Mezhdurechensk, Belovo, Kemerovo, Novokuznetsk, Osinniki, Leninsk-Kuznetsky. Coal mines can be found almost everywhere in the Kemerovo region. About 180 million tons of coal is mined annually.
Rail transport is well developed in the region. The Trans-Siberian Railway, the South Kuzbas branch of West Siberian Railway cross its territory. There are large airports in Kemerovo (Kemerovo International Airport) and Novokuznetsk (Spichenkovo Airport).
Kemerovo oblast of Russia photos
Pictures of kemerovo oblast.
Kemerovo Oblast scenery
Author: Sergey Ustuzhanin
Autumn in Kemerovo Oblast
Winter in Kemerovo Oblast
Author: Max Palchevsky
Landscapes of Kemerovo Oblast
Churches in Kemerovo Oblast
Orthodox church in Kemerovo Oblast
Author: Yury Marchenko
Church in the Kemerovo region
Author: Ludmila Boriskina
The comments of our visitors
- Currently 2.84/5
Rating: 2.8 /5 (167 votes cast)
IMAGES
VIDEO
COMMENTS
Alternative draft: Keel/CB verson - BU: 4.0′ BD: 8.0′. Shoal draft version ('beaver tail'): 5.0′.
In the fall of 1960, Charlie Britton commissioned the renowned yacht design firm, Sparkman and Stephens to design the very first Tartan, the 27. The master Tartan 27 patterns and molds were produced during the fall and winter of 1960/61 and hull number one was completed and launched in the spring of 1961. Tartan Marine was Founded by Charles Britton who bought out what was left of Douglass ...
Imagine yourself setting sail on your own Tartan 3700 yacht! Learn more about this incredible performance cruiser with luxury accommodations.
The Tartan 3700 is a 37.0ft masthead sloop designed by Tim Jackett and built in fiberglass by Tartan Marine since 1999. The Tartan 3700 is a moderate weight sailboat which is a reasonably good performer.
Tartan 3700 is a 37′ 0″ / 11.3 m monohull sailboat designed by Tim Jackett and built by Tartan Yachts starting in 1999.
The Tartan 3700 not only performs in race situations, but is a comfortable live aboard. Call Tartan Yachts for custom sailboat design. 440.510.3042
Rudder & Steering System. Pedestal style rack and pinion steering pedestal. 44" stainless steel wheel with leather cover. Stainless steel pedestal guard. Single lever engine control with stainless steel handle. 5" lighted binnacle compass. High density, closed cell foam rudder blade with reinforced skins.
The TARTAN 37 became one of the builders best selling models. Derived from the TARTAN 38, more of a racer with a deep keel and tall rig. Most boats were delivered with the keel/cb and standard rig as shown here. A tall rig and fixed keel were also available. Draft for fixed keel: 6.58'/2.0m. Another boat based on the same design was built in ...
A key aspect of the Tartan 3700's reassuring stability is the generous 12-foot 7-inch beam that is carried well aft, but with an innovative twist at the stern where topside flare adds plenty of deck and cockpit space, while keeping the transom waterline on the trim side. The accommodation plan of the Tartan 3700 works equally well for feeding ...
The Tartan 37 is a moderately high performance, shoal-draft cruiser built between 1967 and 1988 by Tartan Marine, a company that helped usher in the fiberglass era under Charlie Britton in the 1960s. At the time of the Tartan 37s introduction, the company had its headquarters in Grand River, Ohio, and a factory in Hamlet, N.C.
With the assistance of Tim Jackett, general manager and chief designer at Tartan Yachts, we compared his company's most popular models, the 4100, which has been in production for four years, and the recently introduced 3700.
The Tartan 3700 won best boat honors from both Cruising World and Sail magazine: Best Midsize Cruiser and Top 10 for 2000. The T3700 is marketed to the family that wants to cruise and race.
The Tartan 3700 offers a wide range of design features that can make sail cruising fun and earn wins. Call us today for more information! 440.510.3042
The Tartan 3700 is a 37.0ft masthead sloop designed by Tim Jackett and built in fiberglass by Tartan Marine since 1999. The Tartan 3700 is a moderate weight sailboat which is a reasonably good performer. It is stable / stiff and has a low righting capability if capsized. It is best suited as a coastal cruiser. The fuel capacity is originally small.
Kemerovo Oblast (Russian: Ке́меровская о́бласть, romanized: Kemerovskaya oblast', IPA: [ˈkʲemʲɪrəfskəjə ˈobləsʲtʲ kʊzˈbas]), also known as Kuzbass (Russian: Кузба́сс), [11] after the Kuznetsk Basin, is a federal subject of Russia (an oblast). Kemerovo is the administrative center and largest city of the oblast. Kemerovo Oblast is one of Russia's most ...
Planning an event far into the future for Novokuznetsk, Kemerovo-Oblast-Kuzbass? MSN Weather provides an accurate 10 day outlook for the coming month as well as precision historical weather data ...
You must be logged in to create new topics. Log In. Username:
Kemerovo Oblast - Overview Kemerovo Oblast is a federal subject of Russia located in the south-east of Western Siberia, part of the Siberian Federal District. This region is also known as Kuzbass. In 2019, "Kuzbass" officially became the second name of Kemerovo Oblast. Kemerovo is the capital city of the region.
See our radar map for Novokuznetsk, Kemerovo-Oblast-Kuzbass weather updates. Check for severe weather including wildfires and hurricanes, or just check to see when rain is due.
Sophisticated Designs • Exceptional Performance • Superior Value 440-357-7777 • www.tartanyachts.com • Fantail • 101 • 115 • 3400 • 3700 • 4000 • 4300 • 4700 • 5300